| Hexamite |
HE900T Hexamite Positioning Device |
|
|
THIS PAGE IS OBSOLETE PLEASE CLICK HERE
| HE900T
Ultrasonic Positioning Device The HE900T is designed to operate as a point in a multipoint multidimensional positioning system. It can be setup as a pilot or a beacon via serial I/ O pins on the back of the device. The device scans for ultrasonic activity, if none is detected the device goes progressively into deeper and deeper sleep mode. If no activity is detected for 30 seconds the device enters deep sleep where it consumes about 50 micro amperes. It can take up to 60 seconds to bring the device out of deep sleep. In active mode the average consumption is about 2mA. The HE900T comes with an internal rechargeable Lithium battery as an option. Guides allow drilling of two 3mm holes clear through the tag for mounting. The detection angle for the HE900T is 120 degrees at a distance of 6 meters. At a distance of 8 meters this angle is 60 degrees. These angles are measured HE900M as pilot. Size: 0.25" x 1" x 2.5" (6.3 x 25 x 63 mm) |
![]() |
|
HE900T Hexamite Positioning Device |
| HE900T
Pin Description
The HE900T has 8 turned pin contacts on the back panel, in groups of 4; the contacts are 0.1" apart. These pins are used for charging, supplying power and other functions. The back panel has a copper layer, the copper is polished and coated with special material for protection against corrosion. |
|
|
Copyright © 1999 [Hexamite]. All rights reserved. |